- Unifi ac pro device discovery tool install#
- Unifi ac pro device discovery tool software#
- Unifi ac pro device discovery tool password#
Then you can reboot and hopefully when it comes back it’s running OpenWRT at the default 192.168.1.1 IP address. dd if=/dev/zero bs=1 count=1 of=/dev/mtd4 ensure bootloader is set to kernel0 (OpenWRT doesn’t support multi-boot). LD_LIBRARY_PATH=$/lib lib/ld-musl-mips-sf.so.1 sbin/mtd erase kernel1Ĭontinue on with the rest of the instructions, e.g. Fortunately, musl supports LD_LIBRARY_PATH which makes it super easy.
Now we flash the OpenWRT image to kernel0, however because of the extra library flashing is slightly different. scp openwrt*squashfs-sysupgrade.bin *ipk SSH onto the device and extract the packages into /tmp/flash directory.
Unifi ac pro device discovery tool password#
192.168.1.123/24) to an interface on your machine.Ĭopy the firmware as well as the ipk packages to your device over scp, the user is ubnt and the password is ubnt. If so, add an IP address from that range (e.g. If no DHCP is found, the AP should fall back to 192.168.1.20. Or, plug it into your network and check what IP the device got. Or, boot it up and then after a few minutes, plug it into your network.
Unifi ac pro device discovery tool install#
Copy the files over and install themĮither connect your AP directly to your Linux machine and boot it up the device with stock firmware so that it doesn’t get an IP from DHCP. Now follow on with the rest of the instructions to get your device on the network and copy the files over. I am doing this on some AC Lite devices (hence the firmware file for me is openwrt-21.02.0-ath79-generic-ubnt_unifiac-lite-squashfs-sysupgrade.bin) but your device might be different. Make sure that you also download the firmware for your device. Let’s grab all of the required packages now. Getting the firmware, tools and libraries UBNT-BZ.v4.3.20# lib/ld-musl-mips-sf.so.1 sbin/mtd write openwrt-21.02.0-ath79-generic-ubnt_unifiac-lite-squashfs-sysupgrade.bin kernel0Įrror loading shared library libubox.so.20210516: No such file or directory (needed by sbin/mtd)Įrror relocating sbin/mtd: md5_end: symbol not foundĮrror relocating sbin/mtd: md5sum: symbol not foundĮrror relocating sbin/mtd: md5_hash: symbol not foundĮrror relocating sbin/mtd: md5_begin: symbol not found However, when following the instructions to flash, we get this library error. As the device is running stock firmware, we will need to download the packages from OpenWRT and extract them onto the device so that we can use them to flash the firmware.
Unifi ac pro device discovery tool software#
On the Ubiquiti site here is a link for latest Software here which Includes a link for 'UniFi v5.0.6 Controller for Windows' but no. Ubiquiti AP AC LiteĪs per the title we are using OpenWRT tools to flash the firmware. You need to use the unifi discover tool, not the controller software, if the discovery tool can't find it, try disabling the firewall of the computer running the discovery tool. However, it did require a few extra tweaks for 20.02 due to library errors. I chose option 2, using mtd-tools from OpenWRT, as I think it’s the most simple. One uses tftp but requires a specific version of the stock firmware, others use mtd flashing tools (either from OpenWRT or stock) flashing tools, and another via serial. The Wiki instructions for flashing Ubiquiti AP AC devices (including Pro, Lite and LR versions) has a number of options. Recently OpenWRT released version 20.02 and it’s great!